Difference between revisions of "GM862 SMD Connector"
m (category) |
m (Reverted edits by 74.208.11.169 (Talk); changed back to last version by Wiml) |
| (One intermediate revision by one other user not shown) | |
(No difference)
| |
Latest revision as of 16:52, 10 November 2007
|
|
Description:
This is the Molex SMD connector that interfaces to the GM862 Cellular Modules. If you're prototyping with the GM862, you pretty much have to have one of these. Watch out, it's 0.5mm pitch, 50-pin, SMD connector. You can solder it by hand, but you'll need some experience, solder wick, and a decent iron. You can also reflow it with a hot-plate and a stencil. If you're not comfortable soldering it, there are breakout boards and designs available from SFE.
Documents:
Molex Connector Footprint and Spec Sheet
Footprints:
Take a look at the SFE Footprint Library
FP Name: GM862
The dimension stuff can be found on page x of the hardware datasheet.
Manufacturer Info:
Molex part # : 53748-0504
Related Items:
GM862 Cellular Module
Original Creator: --Sparkfun 12:08, 26 January 2006 (PST)
