Difference between revisions of "GM862 Cellular Module"
(revert to 04:51, 6 February 2006 by Wiml) |
m (Protected "GM862 Cellular Module": spam magnet [edit=autoconfirmed:move=autoconfirmed] (expires 23:40, 4 May 2008 (UTC))) |
| (15 intermediate revisions by 12 users not shown) | |
(No difference)
| |
Latest revision as of 16:40, 4 February 2008
|
|
Description:
The GM862 is a GSM cellular module that enables you to connect to the cellular network using simple 'AT' commands.
Yes it's as easy as sending:
ATD 3035551234;
Couple down sides to this module:
1) The GM862 uses a very specialized 50-pin molex connector that only comes in SMD.
2) The GM862 requires 3.8V at 1.9A peak. So you'll need to use the LT1528 as well.
Cool module. Works anywhere with GSM connectivity (North America and Europe included).
Documents:
GM862 Hardware User Guide
Footprints:
SFE Footprint Library
FP Name: GM862
The dimension stuff can be found on page x of the hardware datasheet. To implement this module onto a PCB layout, see the footprints associated with the SMD connector.
Related Items:
GM862 SMD Connector
Original Creator: --Sparkfun 22:18, 25 January 2006 (PST)
