Minimig NTSC fix code0 minimig1.v

//Master clock generator for minimig
//This module generates all necessary clock from the 3.579545 NTSC clock
module clock_generator(mclk,c_28m,c_7m,cq_7m,e);
input mclk;                     //3.579545 MHz master oscillator input
output c_28m;                   //28.63636 MHz clock out
output c_7m;                    //7.15909  MHz  clock out
output cq_7m;                   //7.15909  MHz  qudrature clock out
output e;                       //0.715909  MHz clock enable out

reg ic_14m;                     //14.31818 MHz intermediate frequency                   
reg ic_7m;                      
reg icq_7m;                     

reg     [3:0]ediv;              //used to generate e clock enable

// Instantiate the DCM module
// the DCM is configured to generator c_28m from mclk (multiply by 8)
clock_dcm dcm1(
    .CLKIN_IN(mclk), 
    .RST_IN(1'b0), 
    .CLKFX_OUT(c_28m), 
    .CLKIN_IBUFG_OUT(), 
    .LOCKED_OUT()
    );

//generator ic_14m
always @(posedge c_28m)
        ic_14m<=~ic_14m;

//generate ic_7m
always @(posedge ic_14m)
        ic_7m<=~ic_7m;

//generate icq_7m
always @(negedge ic_14m)
        icq_7m<=ic_7m;

//generate e
always @(posedge c_7m)
        if(e)
                ediv<=9;
        else
                ediv<=ediv-1;
assign e=(ediv==4'b0000)?1:0;


//clock buffers
BUFG buf1 (     .I(ic_7m), 
               .O(c_7m) );
BUFG buf2 (     .I(icq_7m), 
               .O(cq_7m));

endmodule