BoostC Optimizations

some notes from the forum still to be formatted

The following post yeilded several real and unreal optimizations http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

Incrementing

subtracting/deincrementing is faster than adding/incrementing

Valid? believed not to be true

Post: http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

Avoid Division

not using division saves ~35 bytes

Valid? division is slow, but we think not by powers of 2, which are shifts ( if divisor know at compile time )

Post: http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

Left vs Right Shift

Left Shifting is faster than Right

Valid? believed not to be true.

Post: http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

Function call in ISR

Calling a function in an ISR takes longer than outside an ISR

Valid? believed not to be true

Post: http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

Function called Only Once

Never use a function for a single operation, you waste time calling and returning

Valid? believed not to be true.

Post: http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

Shift for Division

Use bit shifting instead of division for speed savings and possible ram savings

(shifting one bit right is equal to dividing by two, etc)

Valid? believed not to be true, optimizer is smart enough to do this.

Post: http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

Arrays and Pointers

Both arrays and pointers generate a lot of code. Use plain variables instead where possible.

I just saved a lot of bytes by reducing the number of index access on array vars.

a stupid and useless example:

  char var[10];
  
  for( i= 0; i<10;i++){
     if ((var[i]==this) || (var[i]==that)) var[i]=somefunction(var[i]);
     var[i]+=2;
  }

if you need to have access on a particular index several times i'm using an extra dummy var.

  char var[10], dummy;
  
  for( i= 0; i<10;i++){
     dummy= var[i];
     if ((dummy==this) || (dummy==that)) dummy=somefunction(dummy)  {
        var[i]= dummy+=2;
     }
  }

something similar happens when you are working with struct variables.

Valid? We are pretty sure it is.

Post: http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

ROM vs RAM

Write constants into ROM not RAM

Valid? In that you save RAM at the expense of ROM, normally you have more ROM than RAM.

Post: http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

Return Values

Do not return values from functions that you wont use/do not need.

Valid? We think so, seems like it must be.

Post: http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

ROM vs RAM

Reuse common code or write a common function and call it will save huge amounts of space ( i suspect agressive opt in BoostC may negate this last but i've yet to test)

Valid? We think so, but even if not, it good coding pratice.

Post: http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

()?:;

i had forgotten about this one but the good old ()?:; (tri-unary?) function conditionally yields slightly smaller/faster code on every compiler i've ever used versus using if()else(); The gain varies from 1-3 lines of asm code, which, if in a high use test will amount to a conciderable savings.

The conditional aspect of this is that the fail function must do something it cannot be left empty or there is no value in using it and will actually result in longer code.

    (test)?(result=1):(result=0);

VS

    if(test)
    {
         result=1;
    }
    else
    {
         result=0;
    }

i had forgotten about this one but the good old ()?:; (tri-unary?) function conditionally yields slightly smaller/faster code...

I tried that one out and there's no gain on SourceBoost C (for PIC16) on any optimization level.

For code like that, I would expect this:

    result = (test ? 1 : 0)

to do better, but it doesn't, either...

with the asm disassembly, but it looks like i am wrong about the new version of the compiler. i am glad to see that these are now the same as they are identical chunks of code.

If i recall correctly, the reason they were different is that the if-else used to use two bit tests to determine logic, which is how you would do it if you had more ifelse tests.

Now i am back to using ?:; just for a cleaner look to code i guess. Thanks for testing that with the new version, it did not even occur to me that it may have changed

more in the post http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

---

do not get this one

Hmm it looks like the if-else might actually be one line shorter now ... altho it is just a lable line.

result= test&1;

Yes that would possibly work in this case as it is an extremly simple example. But on the otherhand if you were writting code for an indicator light, say to notify of an AD conversion, you could not use the return value as your test bit. ie. if test = 4 that mask would fail but (test)?(result=1):(result=0); would work since all non-zero/positives would set result.

i find this handy if you have more than one AD module on your device instead of using the flags as you can now build an AD FIFO cyclical stack or non-blocking time sensitive functions. (all that slow eeprom write stuff while your doing another conversion) ... hmm maybe i should add that example to handy functions ...

Post: http://forum.sourceboost.com/index.php?showtopic=2433&pid=9574&mode=threaded&start=#entry9574

Still More we are working on

Soft vs Hard Stack

Software stack is slower than hardware ( but deeper )

Valid? we think so.

Inline Functoion

Inline function does not really use call and return so is faster, but if called multiple time may take more space ( but for short funtions the call return... can take more space than the function itself. Would be nice if someone did measurements.

Valid? we think so.

Local vs Global

Local values vs global variables.

Issue not understood, local may require some stack heap management, but space should be recovered when function exits so local variable saves memory overall. Probably you should follow good pratices and use variables of th narrowest scope possible.