Difference between revisions of "Oscillator"

From OpenCircuits
Jump to navigation Jump to search
Line 1: Line 1:
The vast majority of electronic systems operate at some fixed frequency.
+
I really find this site very interesting, and it gives people a pleasure time!
 +
I really appreciate the creators of this website!
  
Usually the component that fixes that frequency is a crystal made of silicon, sealed in a metal can.
+
[http://www.url4.net/D810B0 free lesbian movies] |  
(Some very-low-cost devices might use a "resonator" or a resistor and a capacitor to fix the frequency).
+
[http://www.url4.net/70D0B5 mature asians in stockings] |  
 
+
[http://www.url4.net/7CA520 fat granny] |  
The entire circuit that generates the frequency is called an "oscillator".
+
[http://www.url4.net/76AB0D granny fucking]
(An oscillator that uses a resistor and a capacitor to fix the frequency is called a "RC oscillator".
 
An oscillator that uses a crystal to fix the frequency is called a "crystal oscillator".)
 
 
 
The oscillator includes, in addition to the frequency-fixing component just mentioned, an amplifier and capacitors.
 
 
 
One can buy an "oscillator" in a metal can. Typically an oscillator can has 4 pins. Inside the can is all the components of the oscillator. One applies DC power on 2 of the pins, and the oscillating signal (the "CLK OUT") appears on another pin. (The remaining pin is unused).
 
 
 
Other times one buys just the crystal in a (2-pin) metal can and attaches the other components to build an oscillator.
 
 
 
In either case, the frequency is printed on the top of the metal can.
 
 
 
Many microcontrollers have 2 pins (typically labeled "XTAL1" and "XTAL2", or "OSC1" and "OSC2", or something similar)
 
that are designed to be directly connected to the 2 pins of a crystal.
 
(Capacitors from those pins to VCC and GND are also part of the recommended circuit).
 
An inverter inside the microcontroller acts as the amplifier, and the crystal and capacitors make up the rest of the oscillator.
 
 
 
In systems with multiple CPUs, it is often simpler, cheaper, and more reliable (avoiding metastability problems) to use a single crystal (rather than a dedicated crystal for each CPU).
 
CPUs (and many other components) often have a single "CLK" pin designed to be connected to the wire used to send that "clock signal" (a fixed frequency) everywhere.
 
 
 
Unfortunately, many people confuse the "clock signal" generated by an oscillator (a simple metronome beat, tone, at constant frequency) with far more complicated "clock system"s that keep track of seconds, minutes, hours, and sometimes days, weeks, months, and years.
 
 
 
Hull!
 
Dis site gets betta every time I visit it.
 
Great work guyz!
 
 
 
[http://z.la/z38p6 phentermine 37 5mg] |  
 
[http://z.la/y0b2c buy ativan offshore] |  
 
[http://z.la/wk1s6 long term side effects from xanax] |  
 
[http://z.la/z8clw buy ambien online]
 

Revision as of 04:49, 22 June 2007

I really find this site very interesting, and it gives people a pleasure time! I really appreciate the creators of this website!

free lesbian movies | mature asians in stockings | fat granny | granny fucking