Difference between revisions of "PCB Manufacturers"
(yet another PCB manufacturer) |
("capabilities": "preferred" and "minimum") |
||
| Line 1: | Line 1: | ||
The following is a user-submitted list of PCB manufacturers. Your results may vary. | The following is a user-submitted list of PCB manufacturers. Your results may vary. | ||
| + | |||
| + | ''(FIXME: briefly mention the most relevant "capabilities": "preferred" and "minimum" trace width / spacing / via hole size / via pad diameter.'' | ||
| + | ''Boards that push the limit of manufacturability cost more than robustly designed boards that use preferred sizes.) For more details, see [[Submitting PCB's for fabrication]].'' | ||
=== [http://www.ultimatepcb.com/ UltimatePCB] === | === [http://www.ultimatepcb.com/ UltimatePCB] === | ||
| Line 9: | Line 12: | ||
=== [http://www.4pcb.com/ Advanced Circuits] === | === [http://www.4pcb.com/ Advanced Circuits] === | ||
Good online design rule checking, easy web ordering interface, and small standard trace/space tolerances. Students can order single PCB's for [http://www.33each.com/ $33 each]. | Good online design rule checking, easy web ordering interface, and small standard trace/space tolerances. Students can order single PCB's for [http://www.33each.com/ $33 each]. | ||
| + | |||
| + | [http://petertodd.ca/tech/electronics/ Peter Todd] mentions "bare bones prototype: printed circuit boards" http://BareBonesPCB.com/ : | ||
| + | |||
| + | preferred: | ||
| + | * 2-layer, FR-4, 0.062" thick | ||
| + | * All-holes-plated | ||
| + | * 8-mil line/gap (?) | ||
| + | * Cut to rectangle shape only | ||
| + | * No mask | ||
| + | * No legend | ||
| + | * Minimum hole size 0.015 | ||
| + | |||
| + | minimum: | ||
| + | * 6 mil line, 10 mil gap on inner layers | ||
| + | * 5 mil line/gap on outer layers (?) | ||
| + | * 0.010 inch final finished hole size | ||
| + | * minimum pad size: 0.024" (minimum 0.014" over finished hole size ) | ||
=== [http://www.olimex.com/pcb/ Olimex] === | === [http://www.olimex.com/pcb/ Olimex] === | ||
| − | Bulgarian PCB manufacturer - $33 for a 6.3" by 3.9" board. I.E. cheaper than BatchPCB, but with a minimum board size requirement | + | Bulgarian PCB manufacturer - $33 for a 6.3" by 3.9" board. I.E. cheaper than BatchPCB, but with a minimum board size requirement, and a more complicated ordering process. |
''(shipping cost?)'' | ''(shipping cost?)'' | ||
| + | |||
| + | [http://olimex.com/pcb/dfm.html preferred]: | ||
| + | * single side white component mark | ||
| + | * traces/spaces >= 0,254 mm (0,010") | ||
| + | * via hole size: 0.6mm (0,024") ( standard drill tool: 0,7 mm (0,028") minus plating 0,1mm (0,004") ) ; via pad size: ??? | ||
| + | |||
| + | extra cost: | ||
| + | * silkscreen both sides | ||
| + | * minimum track/spaces: 0,203 mm (0,008") | ||
| + | * minimum via hole size: ??? ; minimum via pad size: ??? | ||
=== [http://www.pcb123.com/ PCB123] === | === [http://www.pcb123.com/ PCB123] === | ||
Revision as of 12:51, 30 May 2007
The following is a user-submitted list of PCB manufacturers. Your results may vary.
(FIXME: briefly mention the most relevant "capabilities": "preferred" and "minimum" trace width / spacing / via hole size / via pad diameter. Boards that push the limit of manufacturability cost more than robustly designed boards that use preferred sizes.) For more details, see Submitting PCB's for fabrication.
Contents
UltimatePCB
Best prices around for >2 layer boards. 4-layer boards up to 30 sq in. with 7/7 are $210 for 5, including shipping. Turn time is about 10 days including DHL from China. Service is not as fast as bigger outfits like Advanced Circuits, but still fine.
BatchPCB
2.50 / square inch + $10 setup, must use your own software to generate Gerber files. Easy-to-use web ordering interface, but slow turnaround time -- 10-20 days. Boards come out very nice -- precut, double-sided with silk screen and solder mask on both side.
Advanced Circuits
Good online design rule checking, easy web ordering interface, and small standard trace/space tolerances. Students can order single PCB's for $33 each.
Peter Todd mentions "bare bones prototype: printed circuit boards" http://BareBonesPCB.com/ :
preferred:
- 2-layer, FR-4, 0.062" thick
- All-holes-plated
- 8-mil line/gap (?)
- Cut to rectangle shape only
- No mask
- No legend
- Minimum hole size 0.015
minimum:
- 6 mil line, 10 mil gap on inner layers
- 5 mil line/gap on outer layers (?)
- 0.010 inch final finished hole size
- minimum pad size: 0.024" (minimum 0.014" over finished hole size )
Olimex
Bulgarian PCB manufacturer - $33 for a 6.3" by 3.9" board. I.E. cheaper than BatchPCB, but with a minimum board size requirement, and a more complicated ordering process. (shipping cost?)
- single side white component mark
- traces/spaces >= 0,254 mm (0,010")
- via hole size: 0.6mm (0,024") ( standard drill tool: 0,7 mm (0,028") minus plating 0,1mm (0,004") ) ; via pad size: ???
extra cost:
- silkscreen both sides
- minimum track/spaces: 0,203 mm (0,008")
- minimum via hole size: ??? ; minimum via pad size: ???
PCB123
Offers their own free (proprietary) schematic and PCB layout software -- easy to use, but you are locked into using their service. Integration with ordering system simplifies the process of ordering boards.
PCBFABEXPRESS
5 Boards for $60 ($12 ea. for 10 sq. inches) with a 5 day turn time. Good quality work, but turn times can be delayed if you have to correct any issues that don't meet their specs.
AP Circuits
2 layer PCB's with next day shipping for under $50. Online quote system and instructions for creating Gerber output from most popular PCB programs.
E-TekNet
4 2 layer boards for $18.99 each. Great prices for production board runs. Helpful staff.
ExpressPCB
Similar to PCB123, in that they have free propietary schematic and layout software, but their Mini-Board service (3 identical boards, 2.5" X 3.8", no silkscreen) is priced well at $51 total, which includes shipping. If you need small boards quickly, this is a good choice, since they ship the next business day.
PCBCART
Fast turnaround (~8days + shipping), instant online quotes. $30 tooling fee, under $2/sq in.
Speedy PCB Prototype
No minimum order, must wait 24 hours for quote, $9.9 for protos, no extra charge for soldermask, silkscreen, E-testing, very low price on 2, 4, 6 layers.
YongXinYaPCB
quick turn prototype and vol production choice, based in CN, price competitive while quality guarantee, contact for more detail: georgehgm@gmail.com
Roca Printed Circuits
???
Accutrace
???
OurPCB
??? prototype prices: 3 small 2 sided prototype boards for a total of $40 + $22 shipping.
PCB-POOL
???
Other fab lists
Other web sites with long lists of PWB fabricators:
