Difference between revisions of "RS232 RS485 USB Converter Board"

Revision as of 21:06, 5 March 2007

for low traffic and low speed application
mcu, RS232, RS485/RS422, slave usb all can be interchangeable.
usb side
- support platform in linux with usb driver
- simulated uart programming in application level
rs232 to rs485 side
- Tested max. baudrate is 115200(i assume more high baudrate can be accepted, but i have not tested)

gEDA libraries can be download here or more updated, then modify the gafrc inside converter/

We have components and PCB, Or some have already soldered, if needed email to us: yan

get a usb chips to uart, which with linux driver
- MCT P87C52UBAA(http://pfranc.com/usb/usb.mhtml)
- cypress, PSoC with USB
linux driver
- driver in linux : http://ftdi-usb-sio.sourceforge.net/
- usb in linux guide : http://www.linux-usb.org/USB-guide/book1.html

@@ Line 47: / Line 47: @@
 ===Circuit and PCB===
-*[http://chungyan5.no-ip.org/svn/open_svn/converter gEDA Project Files], for example:
+*[http://chungyan5.no-ip.org/viewvc/converter/ gEDA Project Files]
-:<pre><nowiki>
+:OR [[Media:Converter.zip|Download here, not always updated]]
-svn checkout http://chungyan5.no-ip.org/svn/open_svn/converter/trunk
+:gEDA libraries can be download [http://www.opencircuits.com/PCB_Footprints here] or [http://chungyan5.no-ip.org/WebServerDocs/open_data/KnowledgeDb/ComputerSysDevelopment/apps/eda/gEDA/available_library/ more updated], then modify the gafrc inside converter/
-</nowiki></pre>
-:OR [[Media:Converter.zip|Download here]]
-:gEDA libraries can be download [http://www.opencircuits.com/PCB_Footprints here], then modify the gafrc inside converter/
 *We have components and PCB, Or some have already soldered, if needed email to us: [mailto:yan@amonics.com yan]