Difference between revisions of "Microcontroller User Interfaces"

From OpenCircuits
Jump to navigation Jump to search
Line 19: Line 19:
 
*Con
 
*Con
  
=== Potiometer ===
+
=== Potentiometer ===
*Pro
+
Use to feed a voltage to an analog to digitial converter.  You sould be able to get quite a few discrete values out of this while still having it easy to use.  Instead of a pot you can use a rotary switch with fixed resistors switched. 
*Con
+
 
 +
*Pro   Uses only 1 pin if using an AtoD converter.
 +
*Con   Readint takes a AtoD converter ( or standard io port(s) with software.  Takes a bit of time.
  
 
=== Keypad ===
 
=== Keypad ===

Revision as of 13:40, 6 July 2009

The intent of this page is to document different styles of user interfaces for microcontrollers together with code ( any language ) to drive them. We could use some contributions, can you help?

Input

Momentary Button

  • Pro Cheap, simple, uses only 1 bit port
  • Con If you use a bunch uses a lot of port bits

Rotary Switch

  • Pro
  • Con


Can be self decoding: position of switch indicates state of microcontroller.

Rotary Encoder

  • Pro
  • Con

Potentiometer

Use to feed a voltage to an analog to digitial converter. You sould be able to get quite a few discrete values out of this while still having it easy to use. Instead of a pot you can use a rotary switch with fixed resistors switched.

  • Pro Uses only 1 pin if using an AtoD converter.
  • Con Readint takes a AtoD converter ( or standard io port(s) with software. Takes a bit of time.

Keypad

  • Pro
  • Con

Output

Single Led

In its simplest form either on or off, slightly harder to read are various patterns of blinks.

  • Pro
  • Con

Multiple Led

  • Pro Cheap, simple, easy to drive. One port bit per led ( untill you get to large numbers where ticks kick in ) Match with a pushbutton and state of the microcontroller and means to change it is simple.
  • Con Can use more port bits than you have.

A shift register can make driving a large number easier.

7 Segment Led

LCD