|
|
| (189 intermediate revisions by more than 100 users not shown) |
| Line 1: |
Line 1: |
| − | {{stub}}
| |
| | | | |
| − | == Ferric Chloride ==
| + | Your website, opencircuits.com, may be reaching so many more people! On average, sites like yours could attract over 1K visitors per day. That’s where our AI-powered traffic system makes a difference—it’s designed to attract targeted users straight to your site. |
| | | | |
| − | == Ammonium Persulfate ==
| + | Take the first step with a complimentary 4,000 visitors to realize the impact firsthand. Afterward, our plans provide up to 250,000, helping your website increase its audience and engagement effortlessly. Get more information here: https://shorten.is/cdX6S |
| − | | |
| − | == Sodium Persulfate ==
| |
| − | More environmentally friendly than ferric chloride. Can monitor the etching as initially clear new etchant solution turns blue from the copper ions.
| |
| − | | |
| − | == Hydrochloric Acid and Hydrogen Peroxide ==
| |
| − | Dead simple etchant made from ordinary, store-bought chemicals. Has the advantage that it can be regenerated by bubbling oxygen/air through it, or by adding more H<sub>2</sub>O<sub>2</sub>. The used etchant also makes a great algecide/pH reducer for your pool (and a whole lot cheaper than that stuff they sell at the pool store).
| |
| − | | |
| − | What you need:
| |
| − | * 38% Hydrochloric Acid, HCl (available at finer pool supply stores as Muriatic Acid)
| |
| − | * 3% Hydrogen Peroxide, H<sub>2</sub>O<sub>2</sub> (available from any drug store)
| |
| − | * Plastic or Glass Pans, Jars, and tongs (no metal)
| |
| − | Directions:
| |
| − | | |
| − | # Mix your HCl and H<sub>2</sub>O<sub>2</sub> 1:1 in a non-metalic container, making sure to add the acid slowly to the H<sub>2</sub>O<sub>2</sub>. DO NOT ADD THE H<sub>2</sub>O<sub>2</sub> TO THE ACID!!!
| |
| − | # After you've masked your board, dip it in the solution and constantly agitate. You should notice a dark green cloud start to come from the board almost immedately which quickly dissapears or turns lighter as it gets further from the surface of the board.
| |
| − | # Etching should take about 10min depending on the temperature and how well you agitated the etchant. When all of the copper is gone, dip in water to wash off any stray etchant and stop the reaction.
| |
| − | # When done etching, save used etchant in a non-metalic container and mark clearly its contents.
| |
| − | # If your etchant has become a dark, murky green color, add a little bit of H<sub>2</sub>O<sub>2</sub> or bubble air/O<sub>2</sub> through the solution to regenerate it back to a light, transparent green color.
| |
| − | See links at bottom for more information on the chemistry and some pictures of the process.
| |
| − | | |
| − | == Disposal procedures ==
| |
| − | * [http://www.kepro.com/fmc4.htm Kepro Circuit Systems] Removal of Copper and Persulfate from Spent Sodium Persulfate Etchant by Precipitation
| |
| − | | |
| − | == External Links ==
| |
| − | * [http://www.k9spud.com/wiki/PCB:Etchants Ferric Chloride vs. Ammonium Persulfate] and other etching chemicals.
| |
| − | * [http://members.optusnet.com.au/~eseychell/PCB/etching_CuCl/index.html Etching with Air Regenerated Acid Cupric Chloride]
| |
| − | * [http://esmonde-white.com/etching_pcb.html Etching a Copper PCB with HCl and H2O2]
| |
Your website, opencircuits.com, may be reaching so many more people! On average, sites like yours could attract over 1K visitors per day. That’s where our AI-powered traffic system makes a difference—it’s designed to attract targeted users straight to your site.
Take the first step with a complimentary 4,000 visitors to realize the impact firsthand. Afterward, our plans provide up to 250,000, helping your website increase its audience and engagement effortlessly. Get more information here: https://shorten.is/cdX6S
