Difference between revisions of "Pi Setup: Static IP"
Russ hensel (talk | contribs) |
Russ hensel (talk | contribs) m (1 revision) |
(No difference)
|
Latest revision as of 09:28, 6 January 2017
fixed ip address
sudo leafpad /etc/dhcpcd.conf Scroll all the way to the bottom of the file and add one, or both of the following snippets. Depending on whether you want to set a static IP address for a wired connection or a wireless connection eth0 = wired, wlan0 = wireless. You’ll need to edit the numbers in the snippet so they match your network configuration.
interface = This defines which network interface you are setting the configuration for. static ip_address = This is the IP address that you want to set your device to. (Make sure you leave the /24 at the end) static routers = This is the IP address of your gateway (probably the IP address or your router) static domain_name_servers = This is the IP address of your DNS (probably the IP address of your router). You can add multiple IP addresses here separated with a single space.
interface eth0 static ip_address=192.168.0.176/24 static routers=192.168.0.1 static domain_name_servers=192.168.0.1 interface wlan0 static ip_address=192.168.0.200/24 static routers=192.168.0.1 static domain_name_servers=192.168.0.1