Difference between revisions of "Skillet reflow"
Jump to navigation
Jump to search
This article is a stub. You can help Open Circuits by expanding it.
| Line 1: | Line 1: | ||
{{stub}} | {{stub}} | ||
| + | |||
| + | == Skillet Reflow Soldering == | ||
| + | (or more accurately, Hot Plate Reflow Soldering) | ||
| + | |||
| + | A simple method of reflow soldering, the basic steps are: | ||
| + | * Apply [[solder paste]] to the board (See the Stenciling external link, '''Warning: Solder Paste is hazardous''') | ||
| + | * Place the components with a pair of tweezers (pretty close will often do, the solder will pull small parts into position) | ||
| + | * Lay the board on an electric skillet or hot plate | ||
| + | * Crank up the heat | ||
| + | * Watch for the solder paster to melt | ||
| + | * Turn the heat off | ||
| + | |||
| + | Notes: The surface heating element may not cover the entire plate surface, creating hot and cool spots in the process. To counter this, when observing the soldering process gently move the board to melt solder in any cool spots. {{cite web|http://www.sparkfun.com/commerce/present.php?p=Reflow%20Skillet#Hot%20Plate%20Reflowing}}. | ||
| + | |||
Some people claim that [[toaster oven]]s are better than skillets for reflowing PCBs full of electronic components. | Some people claim that [[toaster oven]]s are better than skillets for reflowing PCBs full of electronic components. | ||
| + | |||
| + | == Safety Warnings == | ||
| + | |||
| + | Solder paste contains lead and is a hazardous material. Be certain you research proper safety procedures before handling or storing it. | ||
| + | |||
| + | == External Links == | ||
| + | * [http://www.sparkfun.com/commerce/present.php?p=Stenciling Spark Fun: Stenciling (http://www.sparkfun.com/commerce/present.php?p=Stenciling)] | ||
| + | * [http://www.sparkfun.com/commerce/present.php?p=Reflow%20Skillet#Hot%20Plate%20Reflowing Spark Fun: Hot Plate Reflowing (http://www.sparkfun.com/commerce/present.php?p=Reflow%20Skillet#Hot%20Plate%20Reflowing)] | ||
| + | |||
| + | [[Category:Techniques]] | ||
Revision as of 07:03, 5 August 2007
This article is a stub. You can help Open Circuits by expanding it.Skillet Reflow Soldering
(or more accurately, Hot Plate Reflow Soldering)
A simple method of reflow soldering, the basic steps are:
- Apply solder paste to the board (See the Stenciling external link, Warning: Solder Paste is hazardous)
- Place the components with a pair of tweezers (pretty close will often do, the solder will pull small parts into position)
- Lay the board on an electric skillet or hot plate
- Crank up the heat
- Watch for the solder paster to melt
- Turn the heat off
Notes: The surface heating element may not cover the entire plate surface, creating hot and cool spots in the process. To counter this, when observing the soldering process gently move the board to melt solder in any cool spots. .
Some people claim that toaster ovens are better than skillets for reflowing PCBs full of electronic components.
Safety Warnings
Solder paste contains lead and is a hazardous material. Be certain you research proper safety procedures before handling or storing it.
