Difference between revisions of "MPPT Solar and Wind Power Boost Charge Controller"
| Line 1: | Line 1: | ||
| − | The [1] is a preliminary circuit idea to match a low voltage solar or wind turbine input to a higher voltage battery. An analogue circuit will measure incoming current and voltage inputs to set the maximum power point tracking (MPPT) and boost the output voltage up to charge a higher, or equal voltage, battery. Input voltage range: 9v through 60v. Output battery voltages: 9v through 60v. MPPT will work only if the battery is higher than the input source. Otherwise, the circuit will act like a direct connection, source to output. It is based on the LTC3703 boost converter. | + | The [1] is a preliminary circuit idea to match a low voltage solar or wind turbine input to a higher voltage battery. An analogue circuit will measure incoming current and voltage inputs to set the maximum power point tracking (MPPT) and boost the output voltage up to charge a higher, or equal voltage, battery. Input voltage range: 9v through 60v. Output battery voltages: 9v through 60v. MPPT will work only if the battery is higher than the input source. Otherwise, the circuit will act like a direct connection, source to output. It is based on the LTC3703 boost converter IC. |
http://www.youtube.com/watch?v=Xw7ehax3330 http://www.youtube.com/watch?v=TX_G_rVwgFM http://www.youtube.com/watch?v=xZDHSsTVJvM http://www.youtube.com/watch?v=crSkmrQavXg http://www.youtube.com/watch?v=HLdK_ghbQs4 http://www.youtube.com/watch?v=yejH6Rw2khM http://www.youtube.com/watch?v=KjyXH7R807E http://www.youtube.com/watch?v=upfmckiKWhI | http://www.youtube.com/watch?v=Xw7ehax3330 http://www.youtube.com/watch?v=TX_G_rVwgFM http://www.youtube.com/watch?v=xZDHSsTVJvM http://www.youtube.com/watch?v=crSkmrQavXg http://www.youtube.com/watch?v=HLdK_ghbQs4 http://www.youtube.com/watch?v=yejH6Rw2khM http://www.youtube.com/watch?v=KjyXH7R807E http://www.youtube.com/watch?v=upfmckiKWhI | ||
Revision as of 04:47, 25 June 2012
The [1] is a preliminary circuit idea to match a low voltage solar or wind turbine input to a higher voltage battery. An analogue circuit will measure incoming current and voltage inputs to set the maximum power point tracking (MPPT) and boost the output voltage up to charge a higher, or equal voltage, battery. Input voltage range: 9v through 60v. Output battery voltages: 9v through 60v. MPPT will work only if the battery is higher than the input source. Otherwise, the circuit will act like a direct connection, source to output. It is based on the LTC3703 boost converter IC.
http://www.youtube.com/watch?v=Xw7ehax3330 http://www.youtube.com/watch?v=TX_G_rVwgFM http://www.youtube.com/watch?v=xZDHSsTVJvM http://www.youtube.com/watch?v=crSkmrQavXg http://www.youtube.com/watch?v=HLdK_ghbQs4 http://www.youtube.com/watch?v=yejH6Rw2khM http://www.youtube.com/watch?v=KjyXH7R807E http://www.youtube.com/watch?v=upfmckiKWhI
